1060 Aluminio 5mm 10mm Aluminum Alloy Sheet For Insulation, Food Industry, Decoration, Lamp, Traffic Signs
Product Introduction
It has high plasticity, corrosion resistance, electrical conductivity and thermal conductivity.
1060 aluminum content of more than 99.6% is also called pure aluminum, which belongs to a commonly used series in the aluminum plate family.
Advantages of this series of aluminum plates: the most commonly used series, the production process is relatively simple, the technology is relatively mature, and the price has a huge advantage over other high-grade alloy aluminum plates.
With good elongation and tensile strength, it can fully meet the conventional processing requirements (stamping, stretching) and high formability.
For industrial pure aluminum, it has high plasticity, corrosion resistance, electrical conductivity and thermal conductivity, but its strength is low, and heat treatment cannot strengthen the machinability. It can be gas welding, hydrogen atom welding and contact welding, and it is not easy to braze; it is easy to withstand Kind of pressure processing and extension, bending.
Typical use
1060 is widely used in products that do not require high strength.
Products are commonly used in signboards, billboards, building exterior decoration, bus body, high-rise and factory wall decoration, kitchen sinks, lamp holders, fan blades, electronic parts, chemical instruments, sheet metal processing parts, deep drawing or spinning concave Shaped utensils, welding parts, heat exchangers, clock surfaces and plates, nameplates, kitchen utensils, decorations, reflective appliances, etc.
Chemical composition
| Alloy, temper | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Zr | other | AL |
| New alloy | Old alloy | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | —— | 0.05 | 0.03 | —— | Single | Total |
| 1060 | L2 | 0.03 | —— | 99.60 |
Mechanical property
| Alloy and Temper | Tensile strength
Rm/Mpa | Yield strength
Rp0.2/Mpa | Elongation /% | Hardness / HBWα |
| 1060-H24 | 105-145 | 75 | 3 | 33 |
Physical property
| Alloy and temper | Thermal expansivity
(20-100℃)
μm/m·k | Melting range
(℃) | Conductivity
20℃(68℉)
(%IACS) | Electrical resistivity 20℃(68℉)
Ωmm2/m | Density (20℃)(g/cm3) |
| 1060-H24 | 23.6 | 646-657 | 61 | 0.0283 | 2.71 |
Quality characteristics
Density: 2.710g/cm³.
Poisson's ratio: 0.33 at 20°C (68F).
Modulus of Elasticity: Stretch: 69GPa (10×106psi)
Category: pure aluminum (AL above 99.6%)
Aluminum plate varieties: bright aluminum plate, brushed aluminum plate, pattern aluminum plate, film aluminum plate...
Supply status: H24, H14, H12, H26, H18, O...
Thickness: 0.2mm-50mm
Width: 1000/1220/1250/1500/2000mm
Length: 2000/2440/2500/3000/6000mm
Product Tags:
|
|
5mm 10mm 1060-H24 Aluminum Alloy Sheet For Insulation Images
|
